MTB-News.de

M-Pire - Ion St Gallerie

Hello ION owners, Sorry for my English.

I have just bought an ION, and have some questions. I hope you guys can help me.

Which hole gives the most travel?
What spring should I be using? I weigh 95kg with kit and like 33-40% sag. Shock is a Vivid 5.1.

Thanks.
 
The position in at the bottom gives you 197 mm travel at the rearwheel. The position at the top gives you 217 mm. The positions at the front are for diffent head angels and also bb heights...
Cannot tell you anything regarding your weight and the spring, but you might use two different spring rates based on the chosen travel. Just give it a try!
I'm using a 350 spring rate for 197 mm and a 400 spring rate with 217 mm in my DHX 4.0. My weight is about 70 kg with equipment...
Do you alreday have a spring mounted in your shock?
 
OK thanks. I have 500lb spring in top hole. Feels a little stiff.
The longer travel (top Hole) must have a higher leverage ratio.

So if you ,move the shock up at the front you slacken the head angle but raise the BB, yes?
What is the standard HA?
 
Your right with the connection between bb height and head angle. The standard head angle is 64.5°. You can also find the whole geometry data here. Unfortunately there is no information about the head angel as a function of the shock position...
https://spreadsheets.google.com/pub?key=0AoGexXROOxG2dGtSVjVGVGpLc3RsOHgtZU9xazA4dHc&authkey=CLm4iaYK&hl=de&single=true&gid=32&output=html

Linkage ratio:
https://spreadsheets.google.com/pub...Joc19BUmc&hl=de&single=true&gid=6&output=html

Linkage characteristics:
https://spreadsheets.google.com/pub...Joc19BUmc&hl=de&single=true&gid=4&output=html

Hope that helps...
 
Tuse Dohnfisch schrieb:
The position in at the bottom gives you 197 mm travel at the rearwheel. The position at the top gives you 217 mm. The positions at the front are for diffent head angels and also bb heights...
Cannot tell you anything regarding your weight and the spring, but you might use two different spring rates based on the chosen travel. Just give it a try!
I'm using a 350 spring rate for 197 mm and a 400 spring rate with 217 mm in my DHX 4.0. My weight is about 70 kg with equipment...
Do you alreday have a spring mounted in your shock?
Zum Vergrößern anklicken....

Bist Du Dir da sicher, dass das obere Loch 217mm Federweg freigibt ?
 
"The position in at the bottom gives you 197 mm travel at the rearwheel. The position at the top gives you 217 mm."

Dennoch scheint dann diese Info hier falsch zu sein, wenn mich gerade nicht alle Sinne verlassen haben?
 
Bitte beachte unsere Verhaltensregeln beim Antworten. Danke 🙂

Ähnliche Themen

RIPPER-SE
Suche NICOLAI M-PIRE
Antworten
0
Aufrufe
269
RIPPER-SE
RIPPER-SE
metbirne77
Nicolai Ion G13
Antworten
0
Aufrufe
1K
metbirne77
metbirne77
Günni-Poo
Decathlon Rockrider E-ST 500 ?
Antworten
5
Aufrufe
1K
on any sunday
on any sunday
G
[A]aufbau Nucleon²
61 62 63
Antworten
2K
Aufrufe
139K
b1k3r
b1k3r
M
Komoot Alternativen?
Antworten
1
Aufrufe
714
DeluXer
DeluXer
Zurück
Oben Unten