Suchergebnisse

For the Fox 38 air pressure required is +32%. Riders using up to 105 psi should be within the 140psi max limit. A Low Pressure version is also available, with a slightly smaller negative chamber. It requires +22% pressure. Performance is almost identical. Seals are standard orings and xrings...

Luft Fusion available now for Lyrik 2023 Negative chamber is 75% bigger than stock (which was already not bad) Positive chamber is also significantly larger. The effect is equivalent to 1 less token. This is just the effect of the air spring (positive and negative chambers) The compression of...

So It seems you have an old unit with the noisy piston which has eluded my controls. Then I can send an updated replacement, completely silent. Pike customers generally reported 2-3 mm shorter travel. 8 mm is strange. But i can offer a 7mm or 10mm longer shaft replacement.

Noise is the only problem, otherwise there's nothing to worry.

In this case the fix is a full replacement of the air shaft.

With the new assembly of the LF the piston puts almost no pressure on the pin.

That method is not reliable and can develop play again in short time. Also, it seems this case is different. The noise is only at top-out...

Dual positive chamber systems add parts to the positive chamber (floating piston and shaft) that make it a bit more progressive. Luft Fusion increases use of full travel only slightly. But it works well toghether with the Trutune if necessary. A custom tuned damper shouldn't be thrown away...

With the new version, the air shaft is the complete unit (almost) Partial replacement is not possible.

Since nobody replied I will answer as best as I can. The Luftkappe increases the negative chamber about +40-50%. Doing so it allows to increase air pressure about +10% for improved support without losing comfort. But it decreases the positive chamber volume. The negative chamber of the Luft...

Lyrik, Pike, before 2023: The negative size is about +80% of the C1 air shaft ZEB C1: +80% ZEB 2023 Debonair+: +45% (but much less progressive) 36 2018-2020: +105% 36 2021+: +80% The 38 is offered in two version: +50% and + 80% (with different pressure requirements) Here's a comparison of the...

The source of the clicking sound at sag point has been found and corrected. As for the noisy top-out experienced in some zeb forks: I haven't been able to replicate the symptom myself so I can't be sure but 90% it's an incomplete equalization. The taller piston in the zeb and 38 versions leaves...

Are you sure the preload spacers are all in there? That sound is so loud, like there's a lot of play... In my lyrik I still run my first prototype. It always had some play in the piston, I never fixed it. Despite that, it was silent at first. After some months it started clicking, then was...

That's not normal. I can send you a replacement shaft. The end stroke progressiveness is difficult to measure in a static test, the increased mid stroke support is more noticeable in those conditions.

The equalization point is around 25 mm of travel.

Hallo zusammen, For this weekend and until monday included I'm taking preorders for custom anodized levers. Only short and long versions. All colors available in glossy and matte.

@MLOutlaw

New stock of CNC levers with sealed bearings, for all sizes! Standard length 10mm longer for more power and modulation 10mm shorter for a quicker, more direct feel In stock now with raw finish; they are going to anodize soon so this is the time for requests your custom color/size...