Kurbelsatz...

Registriert
1. März 2003
Reaktionspunkte
0
Ort
Amsterdam
I am in the middle of building my new bike and in doubt about the drivetrain. In the rear I have a short cage Shimano Ultegra and a 12-25t. cassette, but what to do in front? A single blade setup (Holland is flat enough) and I'm considering two options:

1.) Shimano Ultegra cranks with 42t chainring, Spooky chainguards and an Ultegra 118.5mm bottom bracket

2.) Shimano XT cranks with 44t chainring and a Roox Chaindog (or alternative a Rohlof CC8290 Kettenführung)

Which opinion would be best? It appears to me that I save weight with option 2 but does is work as good as option 1? Also, does anyone know which bottom bracket length I should use for option 2 in order to get a good working chainline?

Thanks in advance,
Timo
 
Go with #1, you'll have a stiffer and cleaner setup! Maybe you should consider using a 40teeth chainring or a 27 in the back to have better uphill performance...
 
Original geschrieben von RobBj123
Go with #1, you'll have a stiffer and cleaner setup! Maybe you should consider using a 40teeth chainring or a 27 in the back to have better uphill performance...
...Thanks Rob. Does the no.1 option have a clear chainline or does the chain easily scrape the guards when going to the 12-13 or 23-25 teeth cogs?

Not sure about the 40t. chainring, here in Amsterdam all is flat so I need speed :)

Regards,
Timo
 
I dunno... I use the front derailleur to prevent the chain from falling from the chainring... But I think these things are designed for exactly this use, so they should work, shouldn't they?
 
Newsletter

Die neuen Artikel jeden Morgen per Mail

Gegen 9 Uhr kommen alle Tests und News von MTB-News.de in dein Postfach. Kostenlos, jederzeit abbestellbar.

Zurück