Liteville 301 mk11 Hinteres Stoßdämpfer-Nadellager NB1115

[pavlov0032]

Good day!

Today the front bolt came loose from the rear shock on the trail. Plastic and aluminum discs were also lost but I found them on the trail.

One of the needle ball bearings was damaged and had to be replaced. Here is the picture

I used a special bearing for Fox shock absorbers from aliexpress, it works wonderfully!

https://www.aliexpress.us/item/3256802460387203.html

Now the real problem is finding the needle bearing which is marked NB1115 and is hard to find in the US.

I could only find it on this site https://www.enduroforkseals.com/pro...ty-bearings/needle-bearings/NB11X15X12.7.html and as you can see it is featured with NB 11x15x12.7 That is 11mm inner diameter, 15mm bore size and 12.7m length

 

[sparkfan]

The needle bearings should be the same in Mk11, Mk12 and Mk13. You can find the details for Mk13 here:
https://assets.syntace.de/media/14/1422/_LV-301_Mk13_Explosion.pdfImo 11x15x12.7 should fit.

You could use also regular DU bushes. Of course, in this case you need the whole bushing kit, which will replace the needle bearing, the axle and the washers afair.