Question about torque 3

Registriert
17. November 2006
Reaktionspunkte
0
Hi. Scuse me if i write in english, but I'm italian and i don't read or write in german.. really sorry, i hope someone can understand me and can answer me.
I have ordered torque 3 size me 2 month ago. For problems to brake I haven't recived it jet.
I that day I have seen this fantastic forum, that speacks a lot about canyon bikes and torqe.

I have read the closed discussion about torque 3 2006, and with the help of online traslator I have understand a little..
Please correct me if I have understand bad, now I try to explain what I have understand :

That some torques bike have the pipe bend ( some mm banana ) and this thing don't allow to reduce to the minimum the tube saddleback to reduce the seat height for steep reduction.

I have read the answer of michael that suggest to use a 30.9 tube saddleback to have lower seat position.
With 30.9 tube is it possible to lower to minimum the tube saddleback ? Someone have tried ?

All the torques have that problem or only the size L and XL ?

I haven'y jet payed because my bike ins't yet assembled, I hope you will answer me as soon as possible because I absolutely need a bike that allow me to put the seat in lower position.

thanks a lot
kalimano
Please aswer me in italian or english !
 
The latest statement of mstaab_canyon was:
Hallo,

Schweissverzug ist bei jedem Fahrrad-Rahmen vorhanden. Das hat nichts mit mangelnder Qualität oder schlechter Verarbeitung zu tun. Beim Torque kann dieser Schweissverzug am Sitzrohr dazu führen, das nicht jeder Rahmen die in unserem Katalog angesprochene komplette Versenkbarkeit bei einer 31,6er Sattelstütze bietet. Der Verzug entsteht beim Torque durch das abgesenkte Oberrohr und den Verlängerungssteg zum Sitzrohr. Deshalb sind auch größere Rahmengrößen eher betroffen als kleinere Rahmenhöhen. Andererseits kann der Rahmen kaum anders designt sein, wenn man ein abgesenktes Oberrohr für mehr Schrittfreiheit bei Bikes mit langen Federwegen haben möchte und dabie gleichzeitig die hervorragendes Steifigkeitswerte des Torque erhalten möchte.

Ansonsten hat dieser Schweissverzug keinerlei Auswirkungen auf Stabilität, Fahrverhalten oder Haltbarkeit. Andere Hersteller haben das gleiche Problem und lösen dies mit einer dünneren Sattelstütze (30.9 z.B.) und einem konifiziertem Sitzrohr, so dass die Stütze quasi im unteren Teil des Sitzrohr frei pendelt (oder das Problem taucht da gar nicht erst auf, weil die Stütze durch das Rahmendesign oder Bohrungen im Sitzrohr ohnehin nicht komplett versenkbar ist). Wir arbeiten zur Zeit an einer Lösung für die Kunden, die von dem Problem betroffen sind und Wert auf die komplette Versenkbarkeit der Stütze legen. Bei den Bikes die ich mir bisher angesehen habe und die das Problem aufweisen fehlen da ca. um die 5-8cm. Ich melde mich hier, wenn es dazu etwas neues gibt. Betroffene Kunden wenden sich bitte an unsere Werkstatt.

Viele Grüße,

Michael

The last part means:

"At the moment we are working on a solution for customers, who are effected by the problem and set value on being able to lower the seatpost completely. Concerning the bikes that I have inspected so far, it's a matter of 5-8cm. I'll post here when there's more news about it. Affected customers please contact our workshop."

It helps a bit to use a seatpost with a plane surface instead of the coarse Syntace one. But you still have to adjust the provided quick release with an allen key every time you lower the seatpost. And it takes brute force to get it down, so I don't know if it's good for the material.
 
Hi Blackwater Park, I'm very happy that you have answered so fast, And I scuse with all german friend if I write only in english.

I have quite understand the message of michael, with the traslator online, but your traslation is more clear, so thanks.

Now I want to know if only some torques have this problem, or is a kind of projectual bug and so ALL the torques have this problem.

Reading the michael's message i have understand that the bigger size suffers more of this problem ( clearly because they have the seat tube longer ).

Are there in this forum torque's owner with bike in size M that suffer the problem, so can't low the saddleback? ( please blackwater translate in german so many more people can answer , thanks a lot )

I have asked to canyon to check my frame before sending me, but I haven't recived any answer. Before paying I want ot be sure to use the bike with low saddleback.

I continue to think that canyon bikes ARE FANTASTIC !!!
I hope that my bike will be totally ok, so my dream for what I have worked a lot can became reality !

Thanks a lot
a greeting from Italy
Kalimano
 
Ciao Kalimano,
principalmente il tubo verticale curvo non da problemi statici, e se è molto importante per té poter abassare la sella completamente potresti comunque usare un reggisella a telescopio tipo questo
2c88113ca2c000c8b20b8b2517822b1a.jpg
(50€)

la soluzione del reggisella 30.9 non é applicabile al torque. Micheal dice che altri costruttori usano un reggisella a diametro ridotto in un tubo verticale internamente conificato (piu largo dopo i primi cm)

riguardo al controllo prima di pagare: non é possibile, devi pagare prima di ricevere la bici ma puoi rimandarla entro 2 setttimane e ti rimborsano i soldi.


Kalimano fragt (da laut Staabi Bikes in großen Größen stärker betroffen sind), ob jemand bei einem Torque in M auch Probleme mit der Versenkbarkeit der Sattelstütze hat.
 
Afaik all sizes are affected by the welding distortion, also a guy with size S has reported to have this problem. And so far I haven't heared from a single Torque owner who is able to lower his seatpost completely without complications.
 
Ciao Kalimano,
principalmente il tubo verticale curvo non da problemi statici, e se è molto importante per té poter abassare la sella completamente potresti comunque usare un reggisella a telescopio tipo questo
2c88113ca2c000c8b20b8b2517822b1a.jpg
(50€)

la soluzione del reggisella 30.9 non é applicabile al torque. Micheal dice che altri costruttori usano un reggisella a diametro ridotto in un tubo verticale internamente conificato (piu largo dopo i primi cm)

riguardo al controllo prima di pagare: non é possibile, devi pagare prima di ricevere la bici ma puoi rimandarla entro 2 setttimane e ti rimborsano i soldi.


Kalimano fragt (da laut Staabi Bikes in großen Größen stärker betroffen sind), ob jemand bei einem Torque in M auch Probleme mit der Versenkbarkeit der Sattelstütze hat.

Ciao Aemkei77, grazie di avermi risposto in italiano.

Ho visto il reggisella telescopico e ho avuto un dubbio. Se non entra fino in fondo il tubo del reggisella perchè c'è questa "bent pipe" come fa la parte esterna del reggisella telescopico ad entrare nella sua totalita' ? Dato che ci sono due tubi uno che scorre dentro l'altro quello esterno piu' grosso dovrebbe entrare totalmente nel telaio per permettere di abbassare totalmente il sellino, ma se la parte del telaio è storta come fa ad entrare totalmente ? avra' lo stesso problema ad entrare del tubo originale, o sbaglio ?

Un'altra cosa che ancora non ho capito se tutte le torque hanno questo problemo o solamente un certo lotto di produzione.
Sa quello che ha scritto blackwater mi pare di aver capito che non conosce nessun possessore di torque che è in grado di abbassare totalmente il sellino senza problemi.. ho capito bene ?

Come mai pensi che non possano fare il controllo al momento dell'assemblaggio prima di spedirmi la bici ?

Grazie mille per la tua disponibilita'. Faccio così tante domande perchè per guadagnare 2000 euro per la torque ci ho messo piu' di un anno e non vorrei trovarmi con un prodotto a lungo sudato ma difettoso che non soddisfi le mie esigenze.


Thanks to all the people that are answering to this post. I will stay tuned for more news and solution of other torque's owner for lowering the tube saddleback.
At the moment, what is more less the minimum size that torque with pipe bent can low the seat ? 5-8 cm or also more ?

Kalimano
 
canyon si che puo fare il controllo - ma non é detto che se ne ricordano.
tu non poui controllare primara di pagare.

Ho visto il reggisella telescopico e ho avuto un dubbio. Se non entra fino in fondo il tubo del reggisella perchè c'è questa "bent pipe" come fa la parte esterna del reggisella telescopico ad entrare nella sua totalita' ? Dato che ci sono due tubi uno che scorre dentro l'altro quello esterno piu' grosso dovrebbe entrare totalmente nel telaio per permettere di abbassare totalmente il sellino, ma se la parte del telaio è storta come fa ad entrare totalmente ? avra' lo stesso problema ad entrare del tubo originale, o sbaglio ?

la parte esterna puo essere piu corta di un reggisella convenzionale, in mode che entra totalmente, e la parte interna puó aggiungere i 5 a 10 cm che altrimenti mancherebbero.

da quello che ho capito, gran parte delle torque son affette dal problema

Entschuldig fürs italienischschreiben - hab ihm nur erklärt wieso eine Teleskopsattelstütze das Problem lösen könnte
 
meiner meinung nach kann eine teleskopsattelstütze das problem ignorieren und dem fahrer dazu verhelfen, den sattel doch auf eine minimum zu versenken. aber das problem liegt doch in der qaulität... kann doch nicht sein, dass jetzt jeder eine tel sattelstütze kaufen muss, nur um das zu erreichen, was canyon im werbetext verspricht...
(sorry, aber ich kann irgendwie nicht begreifen, dass hier neimand meine meinung teilt...)
aber ich hör ja schon auf, sonst wird auch der thread noch geschlossen...
 
löösns
du bist doch Monate begeistert mit deinem torque rumgefahren ohne etwas von dem Problem zu bemerken. Jetzt bist du derjenige der hier am lautesten rumkräht.
was soll das? Willst du auf diese weise geld zurückbekommen? Meinst du das funktioniert?
Gruß
Schappi
 
canyon si che puo fare il controllo - ma non é detto che se ne ricordano.
tu non poui controllare primara di pagare.



la parte esterna puo essere piu corta di un reggisella convenzionale, in mode che entra totalmente, e la parte interna puó aggiungere i 5 a 10 cm che altrimenti mancherebbero.

da quello che ho capito, gran parte delle torque son affette dal problema

Entschuldig fürs italienischschreiben - hab ihm nur erklärt wieso eine Teleskopsattelstütze das Problem lösen könnte

GRazie aemkei, chiedero' alla canyon di controllare appena effettuato l'assemblaggio il mio telaio. In modo che se avesse il difetto me ne cercano uno senza... ( nè avranno almeno uno dritto ?!?!? ).

Anche l'idea del reggisella telescopico sarebbbe una soluzione, anche perchè da quello che ho capito il problema non crea fragilita' nella struttura del telaio o problemi di geometria. Anche se sinceramente preferirei avere la bici perfetta senza dove utilizzare questi mezzi per abbassare la sella.

Sai mica quanto sara' il costo approssimativo della torque FRX ?

Terro' aggiornato il post quando ricevero' notizie dalla canyon.
Grazie mille per la tua disponibilita'

Thanks a lot to everyone
I will post here when I will have news.

Kalimano
 
Mensch löösns,

jetzt hör doch endlich auf zu jammern, wird nicht besser davon. Wenn Du monatelang so glücklich mit dem Bike warst, dann wirst Du das bestimmt auch in Zukunft sein. Ansonsten gib das Teil zurück und kauf Dir was anderes.
 
Hi!
My torque 3 finaly arrived before 2 days, i am quite happy with him but have few question... How much psi i need to "shoot" into dhx and also for bottom out,... i weight 80kg(didnt find table in fox manual)... Because its always to rigid or too soft... Previosly i have pearl 3.3 and it worked nicer, also the rebound doesnt work like on 3.3, when i turn it all the way down it doesnt make dhx rigid ... Also i am not very happy with van 36... too much bottoming (on small jumps), how to change this? because i didnt recieve harder springs... I hope i can make this susspensions work better, so if you please can help me.... Last question is if you can compare esx(7) with torque3... bacause i didnt notice tooooo much differences in geometry, i know i have ridden it only few times but i just want to hear your opinions :) Tnx!
P.S. sorry for my english... but i dont know single word on german
 
... Also i am not very happy with van 36... too much bottoming (on small jumps), how to change this? because i didnt recieve harder springs...
I'm not quite sure about the meaning of the term "bottoming", but I suppose, that you mean, that the fork goes down all 16cm of travel at small jumps?
--> then you are simply too heavy (or your riding style is too aggressive) for the standard springs. --> you have to buy firmer ones. (which are never in the scope of delivery)
 
I think I will switch my torque 3 oreder to torque FRX.
Do you know what kind of totem did will have the frx ? Canyon sayd me that will be fix travel, so can't be 2 step. By the picture i think that is "solo air" but I'm not sure.. do you know something about ?
And something about the rear shox ? I hope it will have fox dhx 5.. but I don't think so :heul:

Do you know when canyon refresh homepage with new models ? Do you know a internet url or an article where they speack about torque FRX ?

Looking the picture the geometry seems the same of other torque ( a part the leght fork ) what do you know about ?
 
I'm not quite sure about the meaning of the term "bottoming", but I suppose, that you mean, that the fork goes down all 16cm of travel at small jumps?
--> then you are simply too heavy (or your riding style is too aggressive) for the standard springs. --> you have to buy firmer ones. (which are never in the scope of delivery)
Mit´´ bottoming ´´ meint er: Durchschlagen .
 
I'm not quite sure about the meaning of the term "bottoming", but I suppose, that you mean, that the fork goes down all 16cm of travel at small jumps?
--> then you are simply too heavy (or your riding style is too aggressive) for the standard springs. --> you have to buy firmer ones. (which are never in the scope of delivery)
yes i mean that fork goes down all 16cm.... i also swich preload all way up to make spring harder... but nothing really changed... what about high and low speed compression... how to adjust that... Do you know where can i find table for dhx 5.0 so i can pump air exactly for my weight(80kg)...
 
I just want to know, is your fox 36 VAN performing like mine(on torque 3)... in other words - going through all travell very easly... Please if you can answer me... My weight is 80kg and i use stock spring (blue one)... Because i still dont know if this is normall or not!

Thanks
 
Now i have a serious problem with dhx 5.0 ... And dont know if he is crashed... but it feels like all air ran out... or like there is no air at all, and uses only maybe 2 last cm of travell... this happened after small jump around 1m... Is there any way to fix this or ?
 
Newsletter

Die neuen Artikel jeden Morgen per Mail

Gegen 9 Uhr kommen alle Tests und News von MTB-News.de in dein Postfach. Kostenlos, jederzeit abbestellbar.

Zurück