bikeaholics.de
Heim-Frickler
Frag mal den Heinz
leichtbau-bremsscheiben!
- Ersteller heinerk.
- Erstellt am
Anzeige
leichtbau-bremsscheiben! .
The Tretschwein
Klaus
es gibt neue Scheiben von Alligator:
180mm -> 100gr
160mm -> 80gr
Sehr hübsch. Morgen lade ich die Bilder hoch
180mm -> 100gr
160mm -> 80gr
Sehr hübsch. Morgen lade ich die Bilder hoch
damonsta
Anarchist
Die lustigen Sternendinger? Auf www.crazyeddie.de sind sie schon drauf, einfach im Forum unter "Eurobike 2008" gucken.
The Tretschwein
Klaus
oh nein, gerade sind die Ashimas in 180 draußen, schon kommen wieder leichtere. Aber ich denke, langsam ist das Ende der Fadenstange in Sachen Gewicht bei Stahlscheiben erreicht. Wird jemand von euch diese Scheiben testen?
Radical_53
Heimatforscher
- Registriert
- 3. März 2003
- Reaktionspunkte
- 1.066
Die Dinger sehen echt immer ulkiger aus. Diese hier wie auch die zackigen Biester von Alligator schauen irgendwie weder technisch noch optisch interessant aus.
damonsta
Anarchist
Die schönsten wirklich leichten Stahlscheiben sind die AiRoToR von Ashima.
MEGATEC
unruhestifter
Irgendwie erinnern mich die Scheiben an die PRIL Blumen Aufkleber die es in den 70er Jahren auf den PRIL Flaschen gab..
- Registriert
- 20. Februar 2006
- Reaktionspunkte
- 4
Neuigkeiten aus den USA
Hello Everyone!
I know by the sudden increase in email traffic this weekend that people are getting more and more anxious to get their rotors! I want to thank everyone who has been very patient and cool during this process, which needless to say has taken WAY longer than we had hoped. The good news is that the finish line is in sight, and we are finally about to start shipping on backorders.
We are scheduled to start shipping on most of our current orders within 1 week. Some people who have ordered very recently may have to wait just a few more days since the finished rotors are coming off the line in batches.
I'll go ahead and take this opportunity to let you know of some upcoming things going on at Scrub as well. Of course within a week or two we will be stocked again with 140mm, 160mm, and 180mm discs in both blue and black anodized. We are also getting closer to releasing our own Scrub organic brake pads that we have been working on. The Kool-Stop pads that we've been recommending are readily available and work fairly well, but expect a noticeable improvement in overall performance when our pads are finally ready. This is something we're very excited about since we've gotten great response already, and this will only make our rotors that much better.
Finally, we are in the very early, brainstorming phases of designing a Scrub wheelset or disc hubset, as well as a complete brake system. If you've ever wished you could have some input on features, specs, or finishes that you'd like to see from the bigger companies, know is your chance! Feel free to send us your "wish list" for the perfect wheelset, disc hubset, or braking system and let's see what kind of dream products we can come up with. We are committed to the providing the best parts money can buy, so we also want to make sure our ideas are inline with what our customers want.
Thanks again to everyone for all of your support, and we are excited to hear what kind of feedback we get when we finally get these backordered rotors out into the world!
Chris
Chris LaCasce
Scrub Components
www.scrubcomponents.com
A little teaser, some unfinished rotor stacks, before anodize and finish machining:
Hello Everyone!
I know by the sudden increase in email traffic this weekend that people are getting more and more anxious to get their rotors! I want to thank everyone who has been very patient and cool during this process, which needless to say has taken WAY longer than we had hoped. The good news is that the finish line is in sight, and we are finally about to start shipping on backorders.
We are scheduled to start shipping on most of our current orders within 1 week. Some people who have ordered very recently may have to wait just a few more days since the finished rotors are coming off the line in batches.
I'll go ahead and take this opportunity to let you know of some upcoming things going on at Scrub as well. Of course within a week or two we will be stocked again with 140mm, 160mm, and 180mm discs in both blue and black anodized. We are also getting closer to releasing our own Scrub organic brake pads that we have been working on. The Kool-Stop pads that we've been recommending are readily available and work fairly well, but expect a noticeable improvement in overall performance when our pads are finally ready. This is something we're very excited about since we've gotten great response already, and this will only make our rotors that much better.
Finally, we are in the very early, brainstorming phases of designing a Scrub wheelset or disc hubset, as well as a complete brake system. If you've ever wished you could have some input on features, specs, or finishes that you'd like to see from the bigger companies, know is your chance! Feel free to send us your "wish list" for the perfect wheelset, disc hubset, or braking system and let's see what kind of dream products we can come up with. We are committed to the providing the best parts money can buy, so we also want to make sure our ideas are inline with what our customers want.
Thanks again to everyone for all of your support, and we are excited to hear what kind of feedback we get when we finally get these backordered rotors out into the world!
Chris
Chris LaCasce
Scrub Components
www.scrubcomponents.com
A little teaser, some unfinished rotor stacks, before anodize and finish machining:
F
fuzzball
Guest
sagt mal gibts keine 140mm Scheiben von Ashima und Alligator, ich muß jetzt doch nicht die Orginal XTR fahren mit Adapter
damonsta
Anarchist
Natürlich gibts die. Eine liegt hier und wartet auf Abnehmer!!!
F
fuzzball
Guest
sorry ungenau gefragt meinte eigentlich die Windcutter; die Ultralight hatte ich vorne schon in 160mm die vibriert mir die 88 Nadellager durch (keine Ahnung wieso die Windcutter nicht), muß ich am WE nochmal testen komme dann eventuell gerne darauf zurück...
topsecretboy
leichtbauguru
meine nadellager werden nicht durchvibriert, trotz 160 oder 180 windcutter in kombi mit formula oro puro
F
fuzzball
Guest
bei der Windcutter gehts, aber nicht bei der Ultralight die vibriert furchtbar
Skunkworks
Stealth Industries Inc.
- Registriert
- 15. Januar 2007
- Reaktionspunkte
- 1.405
Sind die jetzt aus Alu oder was? und zu dem PReis- ich weis nich
Werd auch nicht ganz schlau, er schreibt von: "metal-matrix composite" und "and do not rely on a coating of any kind to provide a friction surface".
Hab auf der EB bei Stand von ceradure.com auch noch BS aus irgendeiner Alu-Ceramic-Legierung gesehen. Zum VP von 150 Euronen.
160 mm 68gr
180 mm 80gr
203 mm 97gr
223 mm 112gr
Gewichte ab Flyer abgeschrieben, sind noch nicht auf der Homepage.
160 mm 68gr
180 mm 80gr
203 mm 97gr
223 mm 112gr
Gewichte ab Flyer abgeschrieben, sind noch nicht auf der Homepage.
felixthewolf
Light-WOLF
bei dem gewicht kann es nur was in richtung alu sein.
wird irgendeine legierung sein, die zugfest und abriebsfest ist.
da kenn ich mich nicht aus.
aber $135 für ne lasergeschnittenes teil was zu 1000den aus der maschine fällt?
bestimmt dochn wundermaterial
felix
wird irgendeine legierung sein, die zugfest und abriebsfest ist.
da kenn ich mich nicht aus.
aber $135 für ne lasergeschnittenes teil was zu 1000den aus der maschine fällt?
bestimmt dochn wundermaterial
felix
Radical_53
Heimatforscher
- Registriert
- 3. März 2003
- Reaktionspunkte
- 1.066
...von der NASA...
@jimi: Waren in dem Flyer zufällig auch Bilder zu sehen?
@jimi: Waren in dem Flyer zufällig auch Bilder zu sehen?
Bitte beachte unsere Verhaltensregeln beim Antworten. Danke 🙂
