Custom Alutech ICB2.0 Builds

nuts

Open Innovation
Forum-Team
MTB-News.de
Registriert
2. November 2004
Reaktionspunkte
1.881
Ort
München
Here's a good place for questions concerning how to build up your ICB2.0. For reference, these are the key specs:

Travel (rear) 130 mm
Travel (front) 130-160 mm
Axle to crown Height 545 mm +/- 15
Tire clearance 75 mm (recommended: up to 63 mm)
Rear-Shock Standard 200 x 57 mm
Shock-Hardware - / 22.2 x 8
Bottom-Bracket BSA 73 mm
Brake-mount PM180
Rear-axle 12x142 mm (M12 metric)
Headset Standard ZS 44/28.6 I ZS 56/40 Tapered
Seatpost 31.6 mm


Here's a pretty fancy build by MTB-News.de editor @Tobias - what will your ICB look like?

1506363_1015426235146901_3450435531042243508_o.jpg
 
I'll build a green ICB 2.0 frame with 90% of the components that are actually on my Kona Explosif:

bf52rp.jpg


- 150mm Fox Factory fork (2014, planning to upgrade to 2016 internals or to a 36 if I'll find a good deal)
- Custom wheelset with DRC Bighorn rims/Novatec hubs/orange nipples :) (a little battered, a new, sturdier/heavyer Stans Flow EX wheelset is coming, I'll try both and take a decision which one to keep on the ICB)
- 1x10 Shimano SLX with 29/42 ZetaBike cassette expander/Oneup RadR rear derailleur cage
- Crank Brothers mallet 2 pedals
- ODI EX750 handlebar (750/790 vario size)
- Funn Funnduro stem (60mm but planning to buy the 45mm version or a 50mm from another brand)
- KS Dropzone 125mm dropper post (will upgrade to a KS Lev 150mm)
- Chromag Trailmaster leather saddle
- Chromag grips
- Brakes I just had a gread deal for a new Magura Mt5 set so I'll keep my SLX on the Explosif

$_35.JPG


Most of my parts are with an orange accent that should match nicely the green frame.
 
My experience with anodized frames is, that the Color changes with the Color of the sunlight. It is awesome, if the frame looks warmer in the evening, with the last sunlight.

Regards...
 
I'll build a green ICB 2.0 frame with 90% of the components that are actually on my Kona Explosif:



- 150mm Fox Factory fork (2014, planning to upgrade to 2016 internals or to a 36 if I'll find a good deal)
- Custom wheelset with DRC Bighorn rims/Novatec hubs/orange nipples :) (a little battered, a new, sturdier/heavyer Stans Flow EX wheelset is coming, I'll try both and take a decision which one to keep on the ICB)
- 1x10 Shimano SLX with 29/42 ZetaBike cassette expander/Oneup RadR rear derailleur cage
- Crank Brothers mallet 2 pedals
- ODI EX750 handlebar (750/790 vario size)
- Funn Funnduro stem (60mm but planning to buy the 45mm version or a 50mm from another brand)
- KS Dropzone 125mm dropper post (will upgrade to a KS Lev 150mm)
- Chromag Trailmaster leather saddle
- Chromag grips
- Brakes I just had a gread deal for a new Magura Mt5 set so I'll keep my SLX on the Explosif

$_35.JPG


Most of my parts are with an orange accent that should match nicely the green frame.


Few project changes, I just made some shopping for the new ride :cool:
Now I'm broke :ka:

11390266_389150007936474_5279365610102280032_n.jpg

YEP COMPONENTS UPTIMIZER HC 155mm dropper post, all black (orange collar not available :(), Swiss Made piece of art





0086865_crank_brothers_mallet_e_pedal.jpeg

CRANK BROTHERS MALLET E pedals, black

2173638_1.3iabrvrfsr.jpg

MAGURA STORM HC 203/180 rotors



STP_ReFLE_or--is.jpg
STP_ReFL8_sw-15-is.jpg

RESET RACING FLATSTACK HEADSET (superlow stack height, 3.5mm upper/2.5mm lower, I have a rather short fork steer tube), black/orange



prod91491_Black_NE_01

FUNN FUNNDURO 45mm stem, black (this one also with a superlow stack height at 30mm), great product, cheap&light

chromag-fubar-osx35-4.jpg

trailmasterdt9.jpg

CHROMAG OSX 780mm bar, black/orange and CHROMAG TRAILMASTER DT saddle, black/orange
but I have yet to decide if to mount them on my current frame or on the ICB 2.0 one (love my current natural leather saddle and black chrome handlebar)

prod82455_Black_NE_01
s780_2013_Shimano_Zee_shadow_plus_rear_derailleur01.jpg

SHIMANO SAINT trigger & ZEE derailleur, to be mounted with Oneup Components RADR cage
 
Just get a pair of brand new rims (kindly replaced from another model by manufacturer):

DRC Bigfoot (Italian Made :love:)
30mm internal width
d-center technology (asymmetrical with offset nipple holes)
hookless
x-drilling system ("crossed" nipple drill pattern, 50% more spokes camber)
lasered graphics

2qs9kzc.jpg


148ojrb.jpg


X-DRILLING-SYSTEM3-602017_540x400.jpg


and also orange Noxon tubeless valves with oversize ring nut

28je4cx.jpg
 
Zurück
Oben Unten