Spindrift 2017

Hat jemand schon das Procore von Schwalbe auf den ZTR Flow EX 650B MK3 montiert ?
Bin mir als alter Schlauchfahrer etwas unsicher, und zwar ist ja auf der Felge bereits ein Dichtband Montiert. Kann ich dieses verwenden oder soll ich es lieber entfernen und das mitgelieferte Felgenband verwenden ? Mein Verstand sagt lass das alte drauf aber wie gesagt hab von Tubeless und Procore keinen plan ;-)
 
Hab das Procore auf der Flow MK3 montiert. Funktioniert bis jetzt gut. Solange das montierte Felgenband tubeless geeignet ist (also abdichtet) musst du nicht das Schwalbeband montieren. Ich habe z.B. das Notubesband montiert und funktioniert gut.
 
Hi lucky owners of Spindrift! ...and his fans ;)
Sorry, that im writing in english, but my german is not so good, so i decided write in EN.
Im writing here, bcs i wanted order new Spindrift, but now im in huge dilema :).

im 182cm, have Enduro EVO 26" in L (457/460 reach, 419 CS, 1211 WB, using 40 mm stem) and im comfortable on it(maybe, sometimes i feel that it should be a hair-thin smaller, but maybe that feeling its bcs the maneuvrability is killed by higher weight).

So to my dilema, im deciding right now between Spindrift (M - 445 reach & CS, 1227 WB), Delirium (M - 447 reach, cca 426 CS, 1194 WB) or Capra (L - 445 reach, cca 430 CS, cca 1204 WB).
I wanted the most Spindrift, but now im worrying about having same lenght reach and CS. I had previously NS Soda, which had same CS and reach and it was not good, but it was basicaly too short bike (reach 427) for my taste.

So i wanted to ask, how is your feelings about geo?
Or whats opinion about that three choices above?
...if i look on geo chart of Spindrift, im more for a L size with 35mm stem, but that 1247 WB scares me :D.

Thanx for any answer/input
 
Hier mal ein Bild von meinem Hobel.
Rahmengröße:L
Körpergröße:180mm
 

Anhänge

  • IMG_20170212_181150_764.jpg
    IMG_20170212_181150_764.jpg
    379,6 KB · Aufrufe: 18
Hi lucky owners of Spindrift! ...and his fans ;)
Sorry, that im writing in english, but my german is not so good, so i decided write in EN.
Im writing here, bcs i wanted order new Spindrift, but now im in huge dilema :).

im 182cm, have Enduro EVO 26" in L (457/460 reach, 419 CS, 1211 WB, using 40 mm stem) and im comfortable on it(maybe, sometimes i feel that it should be a hair-thin smaller, but maybe that feeling its bcs the maneuvrability is killed by higher weight).

So to my dilema, im deciding right now between Spindrift (M - 445 reach & CS, 1227 WB), Delirium (M - 447 reach, cca 426 CS, 1194 WB) or Capra (L - 445 reach, cca 430 CS, cca 1204 WB).
I wanted the most Spindrift, but now im worrying about having same lenght reach and CS. I had previously NS Soda, which had same CS and reach and it was not good, but it was basicaly too short bike (reach 427) for my taste.

So i wanted to ask, how is your feelings about geo?
Or whats opinion about that three choices above?
...if i look on geo chart of Spindrift, im more for a L size with 35mm stem, but that 1247 WB scares me :D.

Thanx for any answer/input

As always it's difficult to judge on the internet if a M or L size frame would be better.
From simply looking on the numbers I would go for M but if you prefer a longer frame than maybe the L is what suits you better.
I'm 1,80m and got the Spindrift in M and even swapped the stem with a 40mm one. And as far as I can say the size is perfect for me by now.
But this all really depends on your personal taste and preferences.

E.g. I had a 2011 Enduro (not the EVO) in M. The Large frame was definetly to big for me.
The Knolly was also on my mind (I really like the option to change the geo) but building up a complete bike was not in my budget this year.

Regards!
 
Hier mal ein Bild von meinem Hobel.
Rahmengröße:L
Körpergröße:180mm

As always it's difficult to judge on the internet if a M or L size frame would be better.
From simply looking on the numbers I would go for M but if you prefer a longer frame than maybe the L is what suits you better.
I'm 1,80m and got the Spindrift in M and even swapped the stem with a 40mm one. And as far as I can say the size is perfect for me by now.
But this all really depends on your personal taste and preferences.

E.g. I had a 2011 Enduro (not the EVO) in M. The Large frame was definetly to big for me.
The Knolly was also on my mind (I really like the option to change the geo) but building up a complete bike was not in my budget this year.

Regards!

Thanx for answers guys!
LukeH: why you choose size L?

Probably i will choose size M with longer stem, bcs in L wheelbase seems pretty long, even that im prefering longer/stable frames
 
Ich mein bis auf fox gibts eh nix in metrisch? Und der x2 passt ja leider ned.

Btw : gibts irgend nen tollen trick den ich übersehen hab um beim db coil zu erkennen ob der sag passt ? Oder einfach ausrechnen und mal irgendwo runterhüppen zum testen ?

Bei den air shocks ist es ja easy..
 
Zuletzt bearbeitet:
X2 stößt wohl mit dem ausgleichsbehälter an .

Was evtl für die setup faulen interessant wär : passen vivids? Bzw gibts die überhaupt (schon) metrisch? Wobei der deluxe bisher echt gut läuft ...
 
Zuletzt bearbeitet:
Ich mein bis auf fox gibts eh nix in metrisch? Und der x2 passt ja leider ned.

Btw : gibts irgend nen tollen trick den ich übersehen hab um beim db coil zu erkennen ob der sag passt ? Oder einfach ausrechnen und mal irgendwo runterhüppen zum testen ?

Bei den air shocks ist es ja easy..


Easy ist was anderes aber ja, so hab ichs bisher gemacht. Ein Toller Trick sieht meiner Meinung nach aber anders aus, wenn jemand was weiß, ich wär ebenfalls dankbar ;)

Btw., beziehen sich die Angaben von Propain zum Setup auf der HP zum CC BD Coil auf das Spindrift 2017 oder noch aufs alte bzw. Rage? Fand es beim Proberollen um den Block bisschen arg fluffig, Feldtest steht aber noch aus..
 
Zurück